Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
whirlpool accubake range
Options
Go to last post Go to first unread
Model: GR450LXHQ2 Brand: Whirlpool Age: 1 - 5 years
Previous Topic Next Topic
ranmar  
#1 Posted : Sunday, February 22, 2009 11:11:33 AM(UTC)
ranmar

Rank: Member

Groups: Registered
Joined: 2/22/2009(UTC)
Posts: 2
Have error codes E2 F1. Turn off breaker and it will work for a while, then codes again. How do I check oven sensor and control board? Thanks
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
kayakcrzy  
#2 Posted : Monday, February 23, 2009 4:47:20 AM(UTC)
kayakcrzy

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/1/2008(UTC)
Posts: 2,429
Ohm out the sensor. It should read 1100 ohms if it is good. If so replace the board. Tom
Back to top
ranmar  
#3 Posted : Wednesday, February 25, 2009 5:21:54 AM(UTC)
ranmar

Rank: Member

Groups: Registered
Joined: 2/22/2009(UTC)
Posts: 2
is this the 6" probe in oven ? and how do I test it will the ohm meter?
Back to top
kayakcrzy  
#4 Posted : Wednesday, February 25, 2009 5:59:19 AM(UTC)
kayakcrzy

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/1/2008(UTC)
Posts: 2,429
Yes it is, and you have to take the back off the oven, and unplug the molex plug, and then put your meter on ohms, and put the meter leads on each of the pins and get a reading. Tom ApplianceEducator.com
Back to top
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET