icemaker overflowing water - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

icemaker overflowing water Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: 626633	Brand: Whirlpool	Age: More than 10 years
Previous Topic Next Topic

edvig		#1 Posted : Friday, February 13, 2009 6:34:02 PM(UTC)
Rank: Member Groups: Registered Joined: 2/13/2009(UTC) Posts: 2		The ice maker is overflowing the ice cube mold with water. I forced the water cycle using t&h and water valve ran for 22 seconds resulting in the overflow. Would like to know if I need a new power module or water valve?? I also tried adjusting the adjustment screw on right side of power module to no avail. Other than that Ice maker works fine, ejects ice and so on.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

kayakcrzy		#2 Posted : Saturday, February 14, 2009 1:00:08 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/1/2008(UTC) Posts: 2,429		i would replace the motor module. most of the times it gets stuck in the fill cycle, and overflows. tom [url=]applianceeducator.com - parts[/url]


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close