Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
rbronstad  
#1 Posted : Saturday, February 7, 2009 9:17:21 AM(UTC)
Quote
rbronstad

Rank: Member

Groups: Registered
Joined: 1/25/2009(UTC)
Posts: 6

Sticks in wash cycle right before rinse with heating delay light on. Move the knob manually to rinse it will complete cycle. Already put new timer in and have same problem.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Saturday, February 7, 2009 7:41:17 PM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
The cause of the problem could be very cold incoming water (much bellow recommended by the manufacturer 120°F) or something wrong in the heating circuit (the heater or the thermostat under the dishwasher).

Here are the break down diagrams for the Maytag dishwasher Model DWU7400AAX

Gene.
rbronstad  
#3 Posted : Sunday, February 8, 2009 2:34:44 PM(UTC)
Quote
rbronstad

Rank: Member

Groups: Registered
Joined: 1/25/2009(UTC)
Posts: 6

Opened the door when cycle stalls, water is very hot.
denman  
#4 Posted : Monday, February 9, 2009 2:40:21 AM(UTC)
Quote
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
You may want to check this, could cause many problems.
http://www.servicematters.com/m...ary/docs/TDD-0011B-B.pdf

Here is a service manual with some info on your unit
http://www.servicematters.com/m...ibrary/docs/16007823.pdf
Wiring diagram 4-23

Have you tried it with the Temp Sense set to off?
If yes does it complete the cycle?
THIS FORUM IS DEAD!!!!!!!
kmitch  
#5 Posted : Tuesday, March 10, 2009 12:54:03 PM(UTC)
Quote
kmitch

Rank: Member

Groups: Registered
Joined: 3/10/2009(UTC)
Posts: 4

I mhaving same problem with my dishwasher/ same model also.
Gene  
#6 Posted : Tuesday, March 10, 2009 2:55:33 PM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Did you do anything to diagnose the problem? Did you follow the instructions from the previous replies?

Gene.
rbronstad  
#7 Posted : Tuesday, March 10, 2009 4:14:04 PM(UTC)
Quote
rbronstad

Rank: Member

Groups: Registered
Joined: 1/25/2009(UTC)
Posts: 6

It completes cycle with temp sensor off
kmitch  
#8 Posted : Wednesday, March 11, 2009 12:16:23 PM(UTC)
Quote
kmitch

Rank: Member

Groups: Registered
Joined: 3/10/2009(UTC)
Posts: 4

mine also completes cycle with temp. sensor off.
Gene  
#9 Posted : Wednesday, March 11, 2009 2:44:13 PM(UTC)
Quote
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Most likely the problem is a bad boost thermostat (#15 on the diagram), but here is a small chance for the control board to be bad too. In order to provide the correct part number for the boost thermostat we need the serial number of the dishwashers.

Gene.
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
Maytag Dishwasher Won't Complete Cycle (Dishwasher Repair)
by dunham family 8/14/2011 10:53:06 AM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.