Rank: Member
Groups: Registered
Joined: 4/30/2011(UTC)
Posts: 2
|
Whirlpool Roper Washer does not drain. Will agitate but will not make a sound or do anything when its time to drain or spin. Please help...my wife is more agitated than the machine.:eek:
|
|
|
|
|
|
Rank: Advanced Member
Groups: Expert
Joined: 7/27/2010(UTC) Posts: 1,395  Location: near the middle of nowhere Was thanked: 24 time(s) in 24 post(s)
|
I would suspect the lid switch. Check to see if you can hear the lid switch clicking when you open and close the lid slowly. If you can't hear the click, its probably bad. If so part number AP3100003.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 4/30/2011(UTC)
Posts: 2
|
Originally Posted by: ThatGuy  I would suspect the lid switch. Check to see if you can hear the lid switch clicking when you open and close the lid slowly. If you can't hear the click, its probably bad. If so part number AP3100003. Do I have to be concerned with any belts on the machine? I will check the Lid Switch and if need be , the pump.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 4/23/2014(UTC)
Posts: 1
|
The Roper has its hoses accessable if you unplug the washer, unscrew the water lines, and tip it over on its side so the part that touches the floor is visible. Socks get trapped in the black hoses that are toward the front of the roper. If you unscrew the hoses and pick around with pliers you can find the sock and screw the black hoses back on.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
