No wash dishwasher - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

No wash dishwasher Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: GU1200XTLB1	Brand: Whirlpool	Age: 1 - 5 years
Previous Topic Next Topic

Leon Scho		#1 Posted : Sunday, October 28, 2007 8:09:25 AM(UTC)
Rank: Member Groups: Registered Joined: 10/28/2007(UTC) Posts: 1		The washing cycle does not function. It pumps water in and out but skips the wash cycle on more than one choice of cleaning. How do you determine if the problem is the Electronic Control? How do you get to it to replace it?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

richappy		#2 Posted : Tuesday, October 30, 2007 3:28:52 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		You will have to pull the inner panel off to get to the control module. Disconnect motor plug and press the latch to turn dishwasher on and select the failing cycle. If no voltage to motor, you have a bad control module. You will need the service sheet to find the right pins on the control module.This is located behind the bottom kick panel.You have a two wire sidewinder motor without a start relay so this makes things simple to check motor voltage.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close