Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
wildride
Options
Go to last post Go to first unread
Model: WTW6600SW2 Brand: Whirlpool Age: 1 - 5 years
Previous Topic Next Topic
jojonychome  
#1 Posted : Thursday, April 21, 2011 9:54:32 AM(UTC)
jojonychome

Rank: Member

Groups: Registered
Joined: 4/21/2011(UTC)
Posts: 20
have a cabrio and it works fine until the last 10 minutes when it goes into spin and drain then the tub starts rocking violently and jumping up and down hitting the sides and top....what might have broken that i need to look for
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
jojonychome  
#2 Posted : Thursday, April 21, 2011 2:28:31 PM(UTC)
jojonychome

Rank: Member

Groups: Registered
Joined: 4/21/2011(UTC)
Posts: 20
looking for any info on cabrio washer that works up until the last 7 minutes when it goes into spin and drain the tubs rocks from side to side and jumps up and down any ideas on what is causing this
Back to top
Tillerman  
#3 Posted : Thursday, April 21, 2011 6:34:53 PM(UTC)
Tillerman

Rank: Member

Groups: Registered
Joined: 4/19/2011(UTC)
Posts: 5
it sounds like the wash has shifted the clothes out of balance. Try next time, to stop the wash, rearange the clothes, and start it back up. If problem still persists, then you may have to look at fixing something.
Back to top
jojonychome  
#4 Posted : Friday, April 22, 2011 6:32:59 AM(UTC)
jojonychome

Rank: Member

Groups: Registered
Joined: 4/21/2011(UTC)
Posts: 20
:confused: :confused: :eek: :eek: i did even out the load several times and also got the ul message but even when i ran the machine with almost nothing in it the rocking from side to side and bouncing up and down continued...baffled as to what i need to look for first as to what might be broken
Back to top
jojonychome  
#5 Posted : Monday, April 25, 2011 9:06:19 AM(UTC)
jojonychome

Rank: Member

Groups: Registered
Joined: 4/21/2011(UTC)
Posts: 20
when i evened out the load in the machine it still rocks back and forth in the last several minutes at high speed...it also did this with nothing in the machine at all....dont know what the next step is any ideas on what to look for that might have broken
Back to top
Users browsing this topic
Guest (4)
Similar Topics
wildride (Washer Repair)
by jojonychome 4/26/2011 7:13:39 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET