Rank: Member
Groups: Registered
Joined: 4/20/2011(UTC)
Posts: 5
|
Hi All, Please see attached photos for detailed areas with issues. 1. First is the leak. I thought it was coming from the gasket area below my arrow but it is actually coming from bottom of tub area... see red arrow - It's a good heavy leak too 2. I noticed that the agitator in the tub wasn't spinning when clothing was placed in the tub full of water. It just squealed and ran very slow. I thought it might be the tensioner.. see arrow in second picture. But I could be wrong. I can rebuilt a V8 but I don't have a clue how to fix the above or what parts I might need. Any help would be greatly appreciated. Cheers :) 4evrmoor attached the following image(s):
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699
|
I cannot get your model to come up, and will not be able to if it is a laundramat type or a foreign model. I think you leak is the seal, and your other problem may be water in the transmission, but hard to say. Here is a link to a service manual for the basic Frigidaire top loader, hope it helps. http://www.emaservicetips.com/pdfs/489_5.pdf
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
