Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
F3 Code
Options
Go to last post Go to first unread
Model: MER5730AAA Brand: Maytag Age: 5 - 10 years
Previous Topic Next Topic
backatya07  
#1 Posted : Saturday, April 16, 2011 3:18:47 PM(UTC)
backatya07

Rank: Member

Groups: Registered
Joined: 4/16/2011(UTC)
Posts: 4
Maytag Range Oven (bake / broil / clean) will not work - I just get a F3 error code and a beeping -

I checked all the connection on the circuit board to make sure they were tight and a visual inspection -

Is this the circuit board ?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
kayakcrzy  
#2 Posted : Sunday, April 17, 2011 3:07:39 AM(UTC)
kayakcrzy

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/1/2008(UTC)
Posts: 2,429
No actually that code comes up as a bad sensor. Your part # is 12001656. Tom Appliance Educator, Appliance Parts, Washer and Dryer Parts, Refridgerator and Freezer Parts, Stove and Oven Parts
Back to top
denman  
#3 Posted : Sunday, April 17, 2011 4:11:15 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Replacement parts for MAYTAG MER5730AAA RANGE- S/C F/S ELE | AppliancePartsPros.com

Sensor is Item 5 in Section 4.

Here is a good link on how to check it.
http://www.applianceaid.com/elecrange.html
Check out 7,8, 20 and 21.
If the sensor checks out OK then odds are that the control board has a problem.

This may also come in handy
16010161 Maytag Gas and Electric Range Service Manual - ApplianceDigest.com

You have to join the site to download the manual but it is free and this is a very good site for manuals and other info for the appliance repair DIYer.
THIS FORUM IS DEAD!!!!!!!
Back to top
backatya07  
#4 Posted : Sunday, April 17, 2011 7:08:38 AM(UTC)
backatya07

Rank: Member

Groups: Registered
Joined: 4/16/2011(UTC)
Posts: 4
Thanks Tom.....
Back to top
kayakcrzy  
#5 Posted : Sunday, April 17, 2011 8:10:29 AM(UTC)
kayakcrzy

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/1/2008(UTC)
Posts: 2,429
Glad to help!!! Sometimes, too many cooks spoil the broth!!! Tom
Back to top
Users browsing this topic
Guest (3)
Similar Topics
F3 Code (Oven Repair (including Ranges and Cooktops))
by GFU125 12/15/2015 1:14:03 PM(UTC)
F3 Code (Oven Repair (including Ranges and Cooktops))
by GFU125 12/15/2015 1:13:50 PM(UTC)
Frigidaire Oven F3 code (Oven Repair (including Ranges and Cooktops))
by gdeanrussell 9/7/2013 6:31:35 AM(UTC)
Whirlpool Gold Oven - E2F3 Code and Broiler Comes on by itself!! (Oven Repair (including Ranges and Cooktops))
by Kentuckypunk 12/11/2012 5:44:12 PM(UTC)
Thermador Dual fuel range oven door locked and f3 code. (Oven Repair (including Ranges and Cooktops))
by mikey77 7/28/2012 7:14:51 AM(UTC)
E2-f3 Code Flashed Onto Display (Oven Repair (including Ranges and Cooktops))
by Todd Reka 6/5/2012 4:24:13 PM(UTC)
F3 code (Microwave Repair)
by cjames 3/22/2012 6:16:15 AM(UTC)
f3 code on maytag mer5730 (Oven Repair (including Ranges and Cooktops))
by fastfreddy 7/12/2011 11:21:58 AM(UTC)
ge oven f3 code (Oven Repair (including Ranges and Cooktops))
by gusjac 2/20/2011 3:43:58 PM(UTC)
GE wall oven F3 code (Oven Repair (including Ranges and Cooktops))
by psquire 12/18/2010 3:28:41 PM(UTC)
Still Getting an F3 Code after heat sensor was replaced (Oven Repair (including Ranges and Cooktops))
by Scott Carlson 8/16/2010 6:39:04 AM(UTC)
oven not heating well, f3 code after replacing temp sensor (Oven Repair (including Ranges and Cooktops))
by jenna99 3/3/2010 11:50:54 AM(UTC)
Spacemaker XL1800 has F3 code (Microwave Repair)
by Cherrystro 10/15/2009 8:07:32 AM(UTC)
Stove F3 Code (Oven Repair (including Ranges and Cooktops))
by batesy 2/22/2009 11:47:12 AM(UTC)
F3 code in Whiprool oven (Oven Repair (including Ranges and Cooktops))
by aranala 2/18/2009 12:10:35 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET