Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

3 Pages<123
Options
Go to last post Go to first unread
Gene  
#21 Posted : Thursday, July 22, 2010 12:42:38 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 2 time(s) in 2 post(s)
Originally Posted by: JERRY314 Go to Quoted Post
ICEMAKEWR MODEL # IS wr30x10014, from what i'v e found this model has been replaced, mine has a 4 pin rectangular plug where most of the new ones have a round plug. Someone has suggested that i replace it with a Frigidare icemaker because they are more dependable. we don't have a lot of funds right now so i didn't want to buy a lot of parts that i may not need. the fridge is a GE Profile Arctic mod. PSS27NHMDWW purchased about 5-6 years ago.


Jerry,

What was the original problem?

Gene.
JERRY314  
#22 Posted : Thursday, July 22, 2010 1:31:16 PM(UTC)
JERRY314

Rank: Member

Groups: Registered
Joined: 7/17/2010(UTC)
Posts: 6

seems that the ice won't dump after it freezes and it doesn't seem to have enough water in the tray. I don't see any water adjustment inside the icemaker since it has a circuit board inside. So is there another adjustment elsewhere for the water or is it just the valve?
Gene  
#23 Posted : Thursday, July 22, 2010 1:41:13 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 2 time(s) in 2 post(s)
Quote:
...the ice won't dump after it freezes and it doesn't seem to have enough water in the tray...


Seems that there are two separate problems and the first problem is more important. What is the status of the green LED? If it's blinking, the ice maker has to be replaced.

The new ice maker has an adapter and can be used with different kind of plugs.

- The ice maker Part number: AP4345120
Part number: AP4345120



Gene.
JERRY314  
#24 Posted : Thursday, July 22, 2010 1:45:16 PM(UTC)
JERRY314

Rank: Member

Groups: Registered
Joined: 7/17/2010(UTC)
Posts: 6

sometimes it blinks and sometimes it doesn't. Is there a problem with the valve or something else?
Gene  
#25 Posted : Thursday, July 22, 2010 6:56:18 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 2 time(s) in 2 post(s)
More likely the only problem is a bad ice maker.

Gene.
richappy  
#26 Posted : Friday, July 23, 2010 1:20:20 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 1 time(s) in 1 post(s)
Good advice Gene, one hint was the fact that it is intermittant which happens with electronic devices; never saw an intermittant optics board.
Users browsing this topic
3 Pages<123
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.