Rank: Member
Groups: Registered
Joined: 3/23/2011(UTC) Posts: 1
|
Spring on left door hinge broke. Tried to get to hinge with no success. Cannot remove side panel. Looks like top must be removed along with other trim. Need instructions to get to and replace hinge.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Remove sealed burners: a) Remove grates b) Turn each burner CCW about 2 inches to loosen. c) Once loose, lift the burner straight up and out of the mounting hole. d) Label and disconnect wire terminals from burner. Remove screw and washer (securing burner support to main top) from the burner openings. Remove the main top: a) Raise the front edge of the maintop and pull forward. b) Lift maintop assembly from the oven chassis. Now you can remove the side panel. - The door hinge kit Part number: AP4012074
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close