Rank: Member
Groups: Registered
Joined: 3/23/2011(UTC) Posts: 1
|
How in the world does one replace a burnout light bulb in this microwave? completely stumped. where is is located and how do I reach it? HELP!!
|
|
|
|
Rank: Advanced Member
Groups: Moderators
Joined: 7/14/2010(UTC) Posts: 5,222
Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: E610046 How in the world does one replace a burnout light bulb in this microwave? completely stumped. where is is located and how do I reach it? HELP!! :) :) Here are your part number and light replacement procedure. You will need to be extremely careful when performing the repair. You'll be working near the high voltage components, and could get hurt badly. Part number: AP3038375
Outer Case Removal
1. Remove screws securing outer case to chassis. 2. Push outer case approximately 1 inch to the back of the unit, which will free case from front plate. 3. Lift outer case from chassis. 4. Reverse procedures to reinstall. Lamp Socket Removal
1. Remove outer case, see “Outer Case Removal” procedure. 2. Remove wire leads from lamp socket terminals. 3. Remove screw securing lamp socket to air duct assembly. 4. Replace and reassemble in reverse order.
Good Luck, :) :) :)
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close