Rank: Member
Groups: Registered
Joined: 12/26/2008(UTC)
Posts: 1
|
The flame on my dryer shuts off after about 3-4 minutes and does not come back on until it sits for a few minutes and is turned back on. If you set it for a half hour or so it will run, the flame will go off and the dryer will continue to run with no flame and not dry the cloths.
I have replaced the following: #32 radiant sensor 338906, #9 Internal-bias thermostat 8318268, #7 thermal fuse 3392519, #15 thermostat 205*F 3403140, #4 ignitor 686590.
After replacing all of these parts it still will not keep the flame going longer then about 3-4 minutes. What other parts can I replace that will fix the problem? Thanks, George
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 9/7/2008(UTC)
Posts: 750
|
Replace the solonoids on the gas valve, I have seen many of then that will fire the first time and then not again until fully cooled down.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
