Fills but wont wash - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Fills but wont wash Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: FDB1050REQ2	Brand: Frigidaire	Age: 5 - 10 years
Previous Topic Next Topic

jlux824		#1 Posted : Saturday, January 29, 2011 3:13:32 AM(UTC)
Rank: Member Groups: Registered Joined: 1/29/2011(UTC) Posts: 1		My dishwasher fills with water and the washing indicator light comes on but does't wash. It drains after a while by itself. Its the same for all of the wash options. Whats up?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Saturday, January 29, 2011 3:57:28 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts Replacement parts for FRIGIDAIRE FDB1050REQ2 Frigidaire/dishwasher \| AppliancePartsPros.com Here is the tech sheet http://manuals.frigidaire.com/prodinfo_pdf/Kinston/154547901.pdf You could try the diagnostics (water service test). Measure across the wash motor when it should be running. If you have 120 volts then the motor is probably toast. If you have 0 volts then the most likely culprit is the control board. Have you tried removing power from the unit for 5 minutes or so to see if it will reset.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close