gsc30cvb (I need Gene I think) - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

gsc30cvb (I need Gene I think) Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: GSC30CVB	Brand: -brand-	Age: More than 10 years
Previous Topic Next Topic

gobtool		#1 Posted : Tuesday, December 2, 2008 8:57:09 AM(UTC)
Rank: Member Groups: Registered Joined: 12/2/2008(UTC) Posts: 4		I need a wiring diagram for a gsc30cvb and a similar range the uses a 35-00-571 or 486752 (same part I think) control. If I can't get a replacement or repair from C G Industries (waiting for reply) I'm going to try to use this later control with modifications to control panel plate and modifying and extending the wiring as the relay board is on clock/disply. I'm familar with electronics and my son is an electronics engineer so it should be possible and safe even if not recommended. Thanks for any info and help. My e-mail is gobtool@aol.com if you would rather send a private message.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

libertyappl		#2 Posted : Tuesday, December 2, 2008 9:04:22 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		I don't know if this will help, but.... Part Details - BOSCH Kit - erc iii control (30"rng), part number: 486752 Part Details - BOSCH Kit - erc iii control (30"rng), part number: 486752 Both of those part numbers listed come with installation instructions. But Gene usually pops on in the afternoons, so He will see your post :) Nat


User Profile View All Posts by User View Thanks

gobtool		#3 Posted : Wednesday, December 3, 2008 7:36:46 AM(UTC)
Rank: Member Groups: Registered Joined: 12/2/2008(UTC) Posts: 4		If I could get the wiring diagrams I could tell if using a newer board would be possible or fesible. I am considering all options instead of replacing. I don't have to have all functions. Thanks again for any help. I forgot to put the brand in the heading. Thermador for anyone doing a search.


User Profile View All Posts by User View Thanks

Admin / APP Team		#4 Posted : Wednesday, December 3, 2008 10:01:41 AM(UTC)
Rank: Administration Groups: Registered Joined: 7/18/2007(UTC) Posts: 799 Was thanked: 1 time(s) in 1 post(s)		I've checked all my resources and so far no luck on the wiring diagram for this model, sorry. I'll keep looking.


User Profile View All Posts by User View Thanks

Servicer		#5 Posted : Saturday, December 20, 2008 5:24:30 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 191		This should help.. File Attachment(s): ESC_GSC_Service Manual.pdf (1,758kb) downloaded 37 time(s).


User Profile View All Posts by User View Thanks

gobtool		#6 Posted : Tuesday, December 23, 2008 8:26:09 AM(UTC)
Rank: Member Groups: Registered Joined: 12/2/2008(UTC) Posts: 4		Just wanted to say thanks to everyone for all the help. C G Industries repaired my oven control/display and relay board and got it back to me very quickly. Everything is working fine now. Thanks again.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close