ge dual wave II microwave inop - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

ge dual wave II microwave inop Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: J HP62V OK2AD	Brand: GE	Age: More than 10 years
Previous Topic Next Topic

brian anth		#1 Posted : Sunday, January 16, 2011 9:39:00 AM(UTC)
Rank: Member Groups: Registered Joined: 1/16/2011(UTC) Posts: 1		microwave over stove will not power up. i have250 volts to what looks like the ac/dc power converter but no dc voltage going down to circuit board. Anyone know how to test ? Micro is completely dead


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

abbotm		#2 Posted : Saturday, August 20, 2011 11:04:19 AM(UTC)
Rank: Member Groups: Registered Joined: 8/20/2011(UTC) Posts: 2		Originally Posted by: brian anth microwave over stove will not power up. i have250 volts to what looks like the ac/dc power converter but no dc voltage going down to circuit board. Anyone know how to test ? Micro is completely dead I have the same problem with a GE JKP62G K3. First the control panel was dead. Replaced the 15 amp fusestat behind it. The control panel came back to life. I reset the clock - all good. When I started the microwave, the fuse popped again. Further investigation showed the high-voltage capacitor shorted. I replaced that, but now the control panel doesn't work. Seems like that last fuse-blowing incident caused something else to fail. The 220 volt circuit is OK - the lower conventional oven works fine. I suspect the high-voltage portion of the microwave is OK since I replaced the HV capacitor, but the low-voltage digital control panel is inoperative. I can't find 5 volts on it anywhere. Any ideas on what to check would be most welcome. Thanks.


User Profile View All Posts by User View Thanks

mimification		#3 Posted : Saturday, August 20, 2011 2:05:20 PM(UTC)
Rank: Member Groups: Registered Joined: 8/20/2011(UTC) Posts: 2		my GE microwave, over the stove model #JVM1850BD 002 does not heat and smells like something burnt, the control panel works


User Profile View All Posts by User View Thanks

abbotm		#4 Posted : Saturday, August 20, 2011 2:37:23 PM(UTC)
Rank: Member Groups: Registered Joined: 8/20/2011(UTC) Posts: 2		Originally Posted by: mimification my GE microwave, over the stove model #JVM1850BD 002 does not heat and smells like something burnt, the control panel works Here's some info from another post here that may help. It may be a shorted high voltage capacitor or a shorted high voltage diode. Here are some links you or someone you know can use (in order given) for test help, but read the safety warnings first: How to Test The High Voltage Capacitor Used In Microwave Ovens How to Test The High-Voltage Diode (Rectifier) Used In Microwave Ovens (if it is NOT shorted, it's probably fine) You can usually find helpful exploded view diagrams and order parts by entering your full model number here. There should be a "mini-manual" hidden inside the unit behind the control panel or hidden on the left side behind the grille, which is very helpful when troubleshooting & testing. If you still have trouble, feel free to let me know. __________________ William E. Miller † prototech@usa.net Read more: http://forum.appliancepartspros...opped.html#ixzz1Vbxg4tgd http://forum.appliancepartspros.com


User Profile View All Posts by User View Thanks

jam1200		#5 Posted : Monday, June 18, 2012 2:21:48 PM(UTC)
Rank: Member Groups: Registered Joined: 6/18/2012(UTC) Posts: 1		i too have model jkp62g0k3bg no power i replaced the 15 amp fuse and still there is no power please help


User Profile View All Posts by User View Thanks

Guest		#6 Posted : Tuesday, October 24, 2023 7:25:27 AM(UTC)
Rank: Guest Groups: Registered Joined: 8/10/2018(UTC) Posts: 0 Location: 99556 Was thanked: 4 time(s) in 4 post(s)		Originally Posted by: abbotm Originally Posted by: brian anth microwave over stove will not power up. i have250 volts to what looks like the ac/dc power converter but no dc voltage going down to circuit board. Anyone know how to test ? Micro is completely dead I have the same problem with a GE JKP62G K3. First the control panel was dead. Replaced the 15 amp fusestat behind it. The control panel came back to life. I reset the clock - all good. When I started the microwave, the fuse popped again. Further investigation showed the high-voltage capacitor shorted. I replaced that, but now the control panel doesn't work. Seems like that last fuse-blowing incident caused something else to fail. The 220 volt circuit is OK - the lower conventional oven works fine. I suspect the high-voltage portion of the microwave is OK since I replaced the HV capacitor, but the low-voltage digital control panel is inoperative. I can't find 5 volts on it anywhere. Any ideas on what to check would be most welcome. Thanks. Originally Posted by: jam1200 i too have model jkp62g0k3bg no power i replaced the 15 amp fuse and still there is no power please help


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close