Rank: Member
Groups: Registered
Joined: 1/10/2011(UTC)
Posts: 2
|
The washer fills and stops. We can cancel to unlock the door so that we can reprogram the washer to spin/drain. While it does not spin, the water is pumped out. We have taken the top off and the belt is fine. The drum is not frozen as we can turn freely by hand. Could this be a motor problem or a circuit board problem? Also, when trying to diagnose the problem we felt that the water was not filling enough. Perhaps we are wrong. How high should the water get on the window of the washer?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699
|
There should be tech notes inside the lower service panel which will tell you how to put it in diagnosistic mode and what to check. Focus on the speed control board which is usually the problem in situations like yours.
Cannot really say about the water level, after you get it going see if your clothes are clean enough.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 1/10/2011(UTC)
Posts: 2
|
Is the speed control board down toward the bottom next to the motor?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699
|
Yes that is it, and it is usually the problem.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 4/15/2011(UTC)
Posts: 1
|
frigidaire front load washer will not spin. Makes draining noise but does not spin :(
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699
|
Normann
Please start a new thread with a new post and give your model number and a detailed description of the problem and any other issues you have had with your machine and someone should be able to help you.
Thanks
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 7/8/2012(UTC)
Posts: 1
|
If it drains and doesn't spin and just makes a sound.
It's your Door lock assembly. part #131763202 Get in on ******** $40 including shipping
If it doesn't drain or spin the drain hose is plugged up. the one before
the pump. It has an accordian type design to it. Just take it off and clean
out the crap and you're good to go
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
