Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
jsmls  
#1 Posted : Wednesday, November 26, 2008 9:12:08 PM(UTC)
jsmls

Rank: Member

Groups: Registered
Joined: 11/23/2008(UTC)
Posts: 12

I have an old Whirlpool washer. Stops after wash cycle;does not drain, rinse or spin. Have turned timer selector switch to different cycles. It has turned back on to rinse and spin. Now, I can't get it past wash cycle. Some say try lid switch. I will replace. But it looks like selector dial may be bad?? Please advise.
Thanks, Joe
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
richappy  
#2 Posted : Thursday, November 27, 2008 9:50:15 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Try lid switch first, your timer is pretty reliable.
jsmls  
#3 Posted : Thursday, November 27, 2008 12:23:34 PM(UTC)
jsmls

Rank: Member

Groups: Registered
Joined: 11/23/2008(UTC)
Posts: 12

Thanks for the tip. Would you tell me how to lift top of cabinet? I see the selector panel folds back. There is a connection on each front corner. Do they just snap up?
Thanks,
Joe
richappy  
#4 Posted : Thursday, November 27, 2008 3:27:22 PM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Pry off both ripply spring retainers, unplug lid switch, and tilt outer panel away.
When putting back, make sure the slots in the bottom of the outer panel go in the frame tabs on the bottom.
richappy  
#5 Posted : Friday, November 28, 2008 8:07:43 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Uh, how many people read Chinese!!, probably none, or 1 %
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.