Water not draining after new pump was installed - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Water not draining after new pump was installed Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: DU800DWGU2	Brand: Whirlpool	Age: 5 - 10 years
Previous Topic Next Topic

lloyd520		#1 Posted : Wednesday, December 29, 2010 4:44:42 PM(UTC)
Rank: Member Groups: Registered Joined: 12/29/2010(UTC) Posts: 1		I had water that was left in the bottom of the dishwasher after each cycle. it started with about a 1/2 inch in the trap and has gotten worse to where it is about 2" to 3" now in the bottom of the dishwasher. I have check all the hoses and there was nothing restricting any of them. I have checked the separator and there was nothing that was restricting it. So I order a new pump and motor and have put it in and ran a test run with nothing in the dishwasher and after a quick wash cycle there is still water in the bottom of the dishwasher and it about 2" to 3". Same problem as before the pump replacement. Thanks for any help.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Joe / APP Team		#2 Posted : Thursday, December 30, 2010 11:16:45 AM(UTC)
Rank: Advanced Member Groups: Moderators Joined: 7/14/2010(UTC) Posts: 5,222 Was thanked: 1 time(s) in 1 post(s)		Originally Posted by: lloyd520 I had water that was left in the bottom of the dishwasher after each cycle. it started with about a 1/2 inch in the trap and has gotten worse to where it is about 2" to 3" now in the bottom of the dishwasher. I have check all the hoses and there was nothing restricting any of them. I have checked the separator and there was nothing that was restricting it. So I order a new pump and motor and have put it in and ran a test run with nothing in the dishwasher and after a quick wash cycle there is still water in the bottom of the dishwasher and it about 2" to 3". Same problem as before the pump replacement. Thanks for any help. Lloyd, You most likely needed the separator repair kit, With all the checks you've made, and the proper checks by the way, You'll need to order and install this part, Part number: AP3115173 To solve your drain problem. Good Luck, :) :) :)


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close