Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
ScorpionX  
#1 Posted : Sunday, December 26, 2010 1:03:01 PM(UTC)
ScorpionX

Rank: Member

Groups: Registered
Joined: 12/26/2010(UTC)
Posts: 1

Hello I have an Amana Dryer that is now 5 years old, it stopped drying clothes just blowing cold air recently, so I ordered some parts after searching the forum here, and replaced the Thermostat, Heater Element and Thermal Fuse. The dryer once reassembled jumped back to life and was working like brand new, after about four or five loads, we are back to square one, it does not heat and dry any of the clothes, any suggestions? Please Help. Thanks.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
kayakcrzy  
#2 Posted : Monday, December 27, 2010 3:41:22 AM(UTC)
kayakcrzy

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/1/2008(UTC)
Posts: 2,429

Yes, the thermal fuse, that is mounted on the element, probably burn't out. Alot of times that happens because the vent is clogged to the outside. Or the the blower housing is clogged up on the inside. Tom ApplianceEducator.com
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.