Icemaker not making full ice. Replaced the dual inlet (solenoid) valve last night. Prior to that, water was leaking from the in-door water dispenser and nothing was going to the icemaker. After replacing the valve, water to door is perfect.
This morning, when there was still no ice, I jumped H-T to initiate a harvest cycle, it worked and there was some water coming into the trays. Later on, a few whole cubes of ice and a few half cubes came out. Further in the day, half cubes again. I repeated the H-T jump and waited to see how much water actually went into the tray and it seems like the trays are barely being filled. I am guessing this is possibly a partially frozen fill tube?? Wanted to try open the fill valve and see if I can manually fill the trays. I have somewhat pieced together from other posts that I can do that by jumping V-N. Is this correct??? Is there any merit to trying that or should I just try to defrost the fill tube?

Thanks for your help!
Lisa

Thanks, Tom! I defrosted the fill tube, but still not full trays with the forced jump. I then tried the screw to adjust the water level. It was a fix! I now have tons of full cubes. Thanks for taking the time to answer!!

Happy Holidays to you!
Lisa