Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
2 Pages<12
LG French Door / Bottom Freezer Door Hinge Cam Broken - Looking for install procedure
Options
Go to last post Go to first unread
Model: LRFD25850ST Brand: -brand- Age: 1 - 5 years
Previous Topic Next Topic
lmallahan  
#11 Posted : Saturday, June 6, 2009 10:14:20 AM(UTC)
lmallahan

Rank: Member

Groups: Registered
Joined: 6/6/2009(UTC)
Posts: 2
My model number isLFD 22860
Back to top
woodchuckie  
#12 Posted : Saturday, June 6, 2009 2:28:49 PM(UTC)
woodchuckie

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/10/2009(UTC)
Posts: 1,363
Maybe your diagram will help put it together. LG | Model #LFD22860SB | REFRIGERATOR | DOORS | SearsPartsDirect.com
Back to top
bearlikeman  
#13 Posted : Friday, August 21, 2009 1:55:19 PM(UTC)
bearlikeman

Rank: Member

Groups: Registered
Joined: 8/21/2009(UTC)
Posts: 1
I have the same problem and the model is LFC22760ST. So which part do we need and anyone tried to replace that hinge cam successfully.
Back to top
jyang30  
#14 Posted : Friday, August 21, 2009 7:26:27 PM(UTC)
jyang30

Rank: Member

Groups: Registered
Joined: 8/21/2009(UTC)
Posts: 1
Thank you Gene for the Manual.

http://136.166.4.200/contents/F...850xx_Service_Manual.pdf

That helped a great bit. The cam is screwed in at the end of the Gasket Bracket which holds the Gasket to the door. But the whole thing is covered by a piece of plastic that runs the length of the door. I would not have risked breaking it were it not for the service manual that explained that the cover is only clicked on to the door. Pry off the cover. Then use a flat head to pry the Gasket Bracket out. Only, for me, to replace the hinge cam, I didn't have to remove the bracket completely. I just pulled it out enough on top to get to the screw on top and replaced it. Clicked everything back in. Paid close attention to placement of the spring to the door edge per Manual. Voila!

For my LFD25850ST, I found the part at repair clinic dot com. part number 1266811
Back to top
gino  
#15 Posted : Saturday, April 23, 2011 9:45:01 PM(UTC)
gino

Rank: Member

Groups: Registered
Joined: 4/23/2011(UTC)
Posts: 2
Originally Posted by: Gene Go to Quoted Post
Hopefully this Service manual will help you.

Gene.

Gene,

Thank you for the manual, it is very helpful. My front display control panel is completely out and I need to remove the dispencer to access the display control panel. In one of the sections, it says that you can pry the dispencer off by the bottom hole access. I will try that tomorrow to see if it works. If you have any suggestions, I would appreciate a reply. Again, thank you.
Back to top
Xrl1959  
#16 Posted : Sunday, May 3, 2015 3:59:59 PM(UTC)
Xrl1959

Rank: Member

Groups: Registered
Joined: 5/3/2015(UTC)
Posts: 1
Can anyone direct me to a service manual for a LFD22860? I have this same issue with the broken mounts for the cam, but none of the links in this thread seem to work. Sorry for the post on an old thread.
Back to top
Users browsing this topic
Guest (4)
2 Pages<12
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET