Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
lfregia  
#1 Posted : Saturday, November 27, 2010 9:18:06 AM(UTC)
lfregia

Rank: Member

Groups: Registered
Joined: 11/27/2010(UTC)
Posts: 1

Timer does not advance and it will not heat.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
kayakcrzy  
#2 Posted : Sunday, November 28, 2010 5:46:33 AM(UTC)
kayakcrzy

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/1/2008(UTC)
Posts: 2,429

Originally Posted by: lfregia Go to Quoted Post
Timer does not advance and it will not heat.


The reason it does not advance is because the dryer is not heating. If you have an ohm meter, check the high limit thermostat, that is mounted on the flame tube. If you get a reading there, then go to the flame sensor on the left side of the flame tube. If you get a reading there, then replace the ignitor. If you don't have a meter, I can tell you how to jump them out. Tom ApplianceEducator.com
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.