Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

10 Pages«<78910>
Options
Go to last post Go to first unread
smith1326  
#81 Posted : Wednesday, October 26, 2011 5:20:38 PM(UTC)
smith1326

Rank: Member

Groups: Registered
Joined: 10/26/2011(UTC)
Posts: 1

which side faces the oven burner.
Gene  
#82 Posted : Friday, October 28, 2011 3:25:08 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert
Joined: 7/19/2007(UTC)
Posts: 27,455

There are no options. You can install it only one way.

Gene.
Admin / APP Team  
#83 Posted : Friday, November 18, 2011 4:22:55 PM(UTC)
Admin / APP Team

Rank: Administration

Groups:
Joined: 7/18/2007(UTC)
Posts: 799

We now have a step-by-step video showing how to replace an oven igniter (either flat or round):

Part number: AP4012072
shirlt  
#84 Posted : Friday, December 2, 2011 8:08:23 AM(UTC)
shirlt

Rank: Member

Groups: Registered
Joined: 12/2/2011(UTC)
Posts: 1

After cleaning cycle I have always gotten a F code. I have only used the clean 3 times on this range. This time I got the F2 which says (for an unknown reason the oven temp has exceeded the preset threshold. The only other code we got was fc, & it says this cod means that component has failed somewhere in door lock circuit. Even after unplugging for a long time we either had lock just clicking off & on constantly, or would not unlock. It is like the lock function is shorting out. Do you have any suggestions what this could be?
Gene  
#85 Posted : Saturday, December 3, 2011 9:07:57 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert
Joined: 7/19/2007(UTC)
Posts: 27,455

Sounds like the problem is a bad oven control board, but there is a small chance for the door latch to be bad as well. Unfortunately there are no instrumental tests in such situation. I would replace the control board first.

- The control board Part number: AP3957552
homer2  
#86 Posted : Tuesday, May 8, 2012 11:04:50 AM(UTC)
homer2

Rank: Member

Groups: Registered
Joined: 7/25/2011(UTC)
Posts: 1

I have a Maytag MGR4451BDW Stove.
Only 2 of the 4 ignigtors work. I can move the burners around and they will spark in different spots.
I checked and there are 3 ignitors with the same part number and one with a different part number. The only difference I see is the one has a wider spade than the rest.
What would be the reason?
If I replace all the ignitors, will that fix my problem?
Thanks
Homer
selder  
#87 Posted : Monday, June 11, 2012 12:48:50 PM(UTC)
selder

Rank: Member

Groups: Registered
Joined: 6/11/2012(UTC)
Posts: 2

Ok so I've replaced the oven igniter, it worked so I put everything back together. Now it won't even come on. Seems to me like there would be a short or something somewhere but I don't know where to start. any help would be appreciated.
Gene  
#88 Posted : Monday, June 11, 2012 2:49:50 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert
Joined: 7/19/2007(UTC)
Posts: 27,455

Originally Posted by: selder Go to Quoted Post
Ok so I've replaced the oven igniter, it worked so I put everything back together. Now it won't even come on. Seems to me like there would be a short or something somewhere but I don't know where to start. any help would be appreciated.


What was the original problem?

What is the complete model number of the oven?

Gene.
selder  
#89 Posted : Friday, June 15, 2012 7:38:14 AM(UTC)
selder

Rank: Member

Groups: Registered
Joined: 6/11/2012(UTC)
Posts: 2

sf377pegw1 its a whirlpool gas range. Oven won't light, but broiler and burners still do.
Gene  
#90 Posted : Saturday, June 16, 2012 5:13:58 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert
Joined: 7/19/2007(UTC)
Posts: 27,455

Check for 120 VAC to the igniter while the control calls for Bake. Post the results.

Gene.
Users browsing this topic
10 Pages«<78910>
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.