Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
n1ktc  
#1 Posted : Wednesday, November 5, 2008 6:55:06 AM(UTC)
n1ktc

Rank: Member

Groups: Registered
Joined: 11/5/2008(UTC)
Posts: 5

My kenmore front load washer won't spin I have replaced the speed control board the motor and the door switch. I removed the belt and ran the washer. The motor will only start if you give it a little "help" then it spins. the drum seems to spin fine by hand with the belt removed so I reinstalled the belt and it will try to spin if you help it but it just rocks back and forth and never gets spinning.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
libertyappl  
#2 Posted : Wednesday, November 5, 2008 10:26:56 AM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097

Is all the water drained out? If not check for an obstruction in the pump. If the water isn't drained out it won't go into spin.

Nat
n1ktc  
#3 Posted : Wednesday, November 5, 2008 2:21:39 PM(UTC)
n1ktc

Rank: Member

Groups: Registered
Joined: 11/5/2008(UTC)
Posts: 5

the water drains out fine.
libertyappl  
#4 Posted : Thursday, November 6, 2008 8:07:48 AM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097

The problem itself may be your motor.

Nat
n1ktc  
#5 Posted : Saturday, November 8, 2008 5:11:02 AM(UTC)
n1ktc

Rank: Member

Groups: Registered
Joined: 11/5/2008(UTC)
Posts: 5

I replaced the motor already, but now when I follow the diagnostic tech sheet I'm getting the same readings with the new motor. The tech sheet says with these results to replace the motor. do you think the new motor could be bad? or is that unlikely?
libertyappl  
#6 Posted : Saturday, November 8, 2008 6:35:54 AM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097

Not likely but it is possible. If you have already changed all of those I would check the pump for an obstruction.
Nat
n1ktc  
#7 Posted : Sunday, November 9, 2008 9:18:26 AM(UTC)
n1ktc

Rank: Member

Groups: Registered
Joined: 11/5/2008(UTC)
Posts: 5

there is no obstruction in the pump , hose or coin trap
Users browsing this topic
Guest (2)
Similar Topics
front loader wont spin (Washer Repair)
by ajdixon 2/9/2013 9:28:01 AM(UTC)
Sears front loader wont spin out (Washer Repair)
by thebigguy1@fastmail.fm 9/3/2011 11:14:14 AM(UTC)
kenmore front loader wont spin or agitate (Washer Repair)
by rrpackageplus 3/24/2011 11:44:43 AM(UTC)
Front loader wont spin (Washer Repair)
by robnrobn2000 1/2/2010 2:01:44 PM(UTC)
Kenmore Front Loader wont spin in any cycle (Washer Repair)
by gerac 7/20/2009 6:14:22 PM(UTC)
Kenmore Front Loader wont spin (Washer Repair)
by corrales 5/14/2009 8:34:40 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.