Rank: Member
Groups: Registered
Joined: 7/19/2007(UTC)
Posts: 1
|
Maytag Neptune dryper won't stay powered up after the power switch is pushed. It will however stay on after several times. Sounds like a relay in the left side of machine won't stay energized. Get's Error code PF, if you push the switch only once. What is the problem and what parts do I need to fix it.
Thanks,
Karl B Frederick
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Karl Most likely the problem with your dryer is a bad control board. It is not repairable and has to be replaced. The part number for the new control board is AP3882440 and you can buy it for $145.49. The breakdown diagrams for the Maytag dryer with the model number MDG5500AWW you can find here: Model MDG5500AWWIf you need the complete step by step instructions how to replace the control board I'll be glad to help you. Good luck. Gene.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 10/22/2007(UTC)
Posts: 81
|
first i would check the power wires at the teminal block where you screwed the cord to make sure the screws are tught after you unplug it of couse
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
