Rank: Member
Groups: Registered
Joined: 11/3/2010(UTC) Posts: 1
|
The sanitized clean light is flashing and turning off power and trying to reset does not solve the problem.
|
|
|
|
Rank: Advanced Member
Groups: Moderators
Joined: 7/14/2010(UTC) Posts: 5,222
Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: terrysater@att.net The sanitized clean light is flashing and turning off power and trying to reset does not solve the problem. Terry, How many times does the light flash, before it pauses ( should be seven times then pause and repeat) if you have a heater circuit problem. A steady flash would indicate a bad key on the control panel. If you remove the lower kickplate from the front of the dishwasher, you should find the Tech Data Sheet and can run all the test modes and diagnostics. Good Luck, :) :) :)
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close