Rank: Member
Groups: Registered
Joined: 10/20/2010(UTC)
Posts: 2
|
My Maytag neptune washer has power going to it, however when I select a function lights come on, door locks and nothing happens. I can hear the machine calling for water(clicking noises) but no water going into washer. I call for spin only, hear clicking noises nothing happens. please help.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 8/16/2007(UTC)
Posts: 3,273
|
It sounds like you may have a problen with one of the control boards. Inside your console you should find a tech sheet that will lead you through a diagnostic program. Do this and you should have fault codes that you can use to diagnose the problem. Let us know what you find.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 10/20/2010(UTC)
Posts: 2
|
Originally Posted by: magician59  It sounds like you may have a problen with one of the control boards. Inside your console you should find a tech sheet that will lead you through a diagnostic program. Do this and you should have fault codes that you can use to diagnose the problem. Let us know what you find. Thank you, I'll give that a try. Joe
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 10/6/2011(UTC)
Posts: 2
|
Originally Posted by: magician59 It sounds like you may have a problen with one of the control boards. Inside your console you should find a tech sheet that will lead you through a diagnostic program. Do this and you should have fault codes that you can use to diagnose the problem. Let us know what you find. thank you very much
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
