Atlantis Maytag Washer -not spinning replaced thrust bearing kit - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Atlantis Maytag Washer -not spinning replaced thrust bearing kit Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: ATLANTIS	Brand: Maytag	Age: 1 - 5 years
Previous Topic Next Topic

nmarie@cox.net		#1 Posted : Monday, October 20, 2008 6:51:40 PM(UTC)
Rank: Member Groups: Registered Joined: 10/20/2008(UTC) Posts: 2		Went through the internet trying to find out what is wrong. Thought it needed a thrust bearing kit-so ordered it from this site. Still not spinning. Original problem : Fills up with water then goes to the next cycle of spinning but no rotation. Then makes these loud sounds which sounds like its spining but not doing anything. the washer unloads the water but clothes have not moved from original spot. Clothes have been coming out wet Do I need a new transmission or a belt. Not to sure what to do. Is it worth repairing???? thanks for any help


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Gene		#2 Posted : Tuesday, October 21, 2008 1:23:00 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		What is the complete model number of the washer? Gene.


User Profile View All Posts by User View Thanks

nmarie@cox.net		#3 Posted : Wednesday, October 22, 2008 6:59:05 PM(UTC)
Rank: Member Groups: Registered Joined: 10/20/2008(UTC) Posts: 2		Model Number is MAV6451AWW ATLANTIS MAYTAG WASHER THANKS


User Profile View All Posts by User View Thanks

Gene		#4 Posted : Thursday, October 23, 2008 10:33:38 AM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Remove the belt and check the transmission drive pulley movement. Turning the pulley CW should oscillate the agitator and turning CCW will release the break for spinning action. If the pulley does not turn, the transmission has to be replaced. Gene.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (4)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close