oil leaked from whirlpool washer on its side - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

oil leaked from whirlpool washer on its side Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: LXR7144EQ2	Brand: Whirlpool	Age: 5 - 10 years
Previous Topic Next Topic

chuckcat		#1 Posted : Monday, October 18, 2010 2:59:50 PM(UTC)
Rank: Member Groups: Registered Joined: 10/18/2010(UTC) Posts: 1		I have a whirlpool washer that I had moved and had to place it on its side. When I got home there was some oil that had leaked on the cardboard. Itook the cover off and there was oil in the back panel. Not alot but enough to make a small pool the size of a large cookie. Is it ok to run the washer with this amount of oil loss or do I need to replace the oil and if so what kind of oil would be used? Thanks CGC


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

richappy		#2 Posted : Monday, October 18, 2010 3:37:59 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		If you wish to add oil, you will need to pull tranny, with a wood chisel, punch a slot in the top cover, and force some 80 weight gear oil in, then seal hole. There are no upper bushings in this direct drive tranny, so a little oil spilled out will probably not have any effect.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close