Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
dyer problem
Options
Go to last post Go to first unread
Model: NOT AVAILABLE Brand: Maytag Age: 1 - 5 years
Previous Topic Next Topic
Sgt.D  
#1 Posted : Friday, October 17, 2008 6:38:32 PM(UTC)
Sgt.D

Rank: Member

Groups: Registered
Joined: 10/16/2008(UTC)
Posts: 8
Just 4 days ago, our dyer wont dry at all. I started to clean the lint stored in the dryer in front & back and it started with normal heat but suddenly disappear after the normal cycle. Sounds familiar? Please advise...thank you
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
libertyappl  
#2 Posted : Friday, October 17, 2008 6:53:38 PM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
Test the cycling thermostats for continuity, make sure they test out.
Nat
Back to top
SublimeMasterJW  
#3 Posted : Friday, October 17, 2008 9:10:20 PM(UTC)
SublimeMasterJW

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/6/2008(UTC)
Posts: 724

Was thanked: 1 time(s) in 1 post(s)
The blower wheel on these dryers
is plastic and will tend to get loose on the shaft
and cause the dryer to be very in efficient.
IM head.jpg
SublimeMasterJW attached the following image(s):
53-0106.jpg
Back to top
Sgt.D  
#4 Posted : Saturday, October 18, 2008 6:47:04 PM(UTC)
Sgt.D

Rank: Member

Groups: Registered
Joined: 10/16/2008(UTC)
Posts: 8
do you have step by step procedure to find this blower, hope you dont mind. I just really a rookie on this dyer. Thanks in advance.
Back to top
Sgt.D  
#5 Posted : Saturday, October 18, 2008 6:52:33 PM(UTC)
Sgt.D

Rank: Member

Groups: Registered
Joined: 10/16/2008(UTC)
Posts: 8
I have open the top of the dryer and have not seen where the thermostat is..any idea? The model of my dyer is SDG305DAWW with SN#1743667EV with that help? If you dont mind can you tell step by step procedure to find this out and to pull out this thermostat. I really appreciate your help.
Back to top
libertyappl  
#6 Posted : Saturday, October 18, 2008 7:16:34 PM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
Remove the rear panel of the dryer, the thermostats are located where the wires connect. There are a few of them. the blower wheel is inside the housing connected to where the exhaust is.
This isn't your exact model but it's pretty close. Click on this link and you can see a breakdown on the unit. Model SDG4000AWW

Nat
Back to top
Users browsing this topic
Similar Topics
Dyer Problem (Dryer Repair)
by Jeannine Medlin 11/10/2010 8:48:29 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET