2 Pages12> Go to Page...

Amana washer smokes Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: ALW430RAW	Brand: Amana	Age: 1 - 5 years
Previous Topic Next Topic

rmiljus		#1 Posted : Tuesday, October 14, 2008 7:05:13 PM(UTC)
Rank: Member Groups: Registered Joined: 10/14/2008(UTC) Posts: 10		Drive belt smoked and burned out, replaced drive belt and idler pully but smoked again, looks like belt is getting hot during drain cycle, belt stays stationary during darin cycle while motor and pump is turning. Any ideas?
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

libertyappl		#2 Posted : Tuesday, October 14, 2008 7:08:40 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		Does it agitate & wash? Nat
User Profile View All Posts by User View Thanks

rmiljus		#3 Posted : Tuesday, October 14, 2008 7:25:17 PM(UTC)
Rank: Member Groups: Registered Joined: 10/14/2008(UTC) Posts: 10		Yes, it agitates and washes, is the belt suppose to stay stationary during the drain cycle?
User Profile View All Posts by User View Thanks

libertyappl		#4 Posted : Tuesday, October 14, 2008 7:30:17 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		No it isn't, it sounds like the break isn't disengaging. Remove the belt and try to turn the brake pully manually. One way is the agitate the otherway is spin and should turn the whole transmission. Here's your parts breakdown, Model ALW430RAW Nat
User Profile View All Posts by User View Thanks

rmiljus		#5 Posted : Tuesday, October 14, 2008 7:39:46 PM(UTC)
Rank: Member Groups: Registered Joined: 10/14/2008(UTC) Posts: 10		Thanks, I'll give that a try tomorrow, thanks Nat
User Profile View All Posts by User View Thanks

libertyappl		#6 Posted : Tuesday, October 14, 2008 7:42:58 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		Keep us posted.....we'll do what we can to help you get your washer going again!! Nat
User Profile View All Posts by User View Thanks

rmiljus		#7 Posted : Wednesday, October 15, 2008 5:52:39 PM(UTC)
Rank: Member Groups: Registered Joined: 10/14/2008(UTC) Posts: 10		Fixed the problem with the smoking belt, the brake got stucked, now there is a little leak coming from the shaft, looks like I have to replace the seals next.
User Profile View All Posts by User View Thanks

libertyappl		#8 Posted : Wednesday, October 15, 2008 8:18:56 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/13/2008(UTC) Posts: 3,097		Those are fun.....good luck. Nat
User Profile View All Posts by User View Thanks

rmiljus		#9 Posted : Wednesday, October 29, 2008 4:52:20 PM(UTC)
Rank: Member Groups: Registered Joined: 10/14/2008(UTC) Posts: 10		Fixed the leak too, the seals were deteriorated and had to buy the whole seal kit. I had to replace the bearings too, machine was too noisy during spin. Looks like water has gotten into the bearings and rusted out.
User Profile View All Posts by User View Thanks

mikeyfz		#10 Posted : Friday, August 27, 2010 3:43:50 PM(UTC)
Rank: Member Groups: Registered Joined: 8/27/2010(UTC) Posts: 4		Originally Posted by: rmiljus Fixed the problem with the smoking belt, the brake got stucked, now there is a little leak coming from the shaft, looks like I have to replace the seals next. Hi; Looks like I have the same problem with my Amana ALW780QAW. Can you give me some advice on how you checked the brake and them fixed it? I've already replaced the belt and have the same symptoms during the drain cycle--pump is working, but the belt is not turning... Thanks! Mike
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (6)

2 Pages12> Go to Page...