Quick,

Are you sure the breaker didn't trip open ?

I would start at the junction box on the frame, make sure the connection is

not loose, then check the door latch switch and latch assembly for operation.

There's not a lot of information on a Dishwasher of this age, but start there

and hopefully, you'll be up and running soon.

Good Luck,

The manufacturers date code is (usually)in the serial number.

First two numbers is the week of manufacture.

Last letter is the year of manufacture.

My date code information only goes back to 1990.

If you have power to the control panel, then I doubt the door switch is the problem.

Now we're into a loose or broken wire(not likely), bad control switch or timer ?

Good Luck,

:cool: :cool: :cool:

I actually figure it's older, closer to 86' for a production date.

Yes , you are probably going to have difficulty getting parts.

:( :( :(