Rank: Member
Groups: Registered
Joined: 9/30/2008(UTC) Posts: 1
|
Does anyone have and thoughts as to why my convection fan decided to quit? The oven heats up just fine but the fan does not turn. Any help would be appreciated. Also I our service people come out to check on our ventilation draft for the stove top grill. When I grill the kitchen gets smoky and the blower doesn't seem to take care of the smoke. They said that the install looked just fine. They did mention that the fan on the exhaust seems to run quiter than most of these Jenn air stoves. Ther is not a whole lot of difference between the HI/LO settings on the fan. Again, any help would be appreciated. Cathy
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Hi Cathy, The convection fan motor has to be removed and the motor windings have to be checked for continuity. If there is nothing wrong then replace the control board (aka clock) after all wires to this motor been tested. - The part number for the convection fan assembly is AP3868135 - The part number for the control board is AP3480663 Here are the break down diagrams for the Jenn Air range Model JDS9860AAPGene.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close