Rank: Member
Groups: Registered
Joined: 9/29/2008(UTC) Posts: 2
|
Any help here would be appreciated. Selecting LITE on any of the burners causes the igniter on the RF (and only on the RF) burner to click. No gas flows in the RF burner (unless that knob is also turned on). Can use a match to manually light any of the burners, so gas flow is not an issue. What should I be looking at or testing?:confused:
The oven is a GE Profile, model number JGB908SEKSS, purchased 2 1/2 years ago.
Regards, Chuck Ike Sucked!
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 8/13/2008(UTC) Posts: 3,097
|
Sounds like the burner ignitor(s) are shorted out each burner has one that attachs to the valve.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/29/2008(UTC) Posts: 2
|
Thanks so much for the quick reply!
In that case, would selecting Lite on the associated shorted igniter still result in another igniter clicking?
How do I troubleshoot this issue? Thanks for the help.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close