Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
johnsoncrew  
#1 Posted : Friday, September 10, 2010 8:10:18 AM(UTC)
johnsoncrew

Rank: Member

Groups: Registered
Joined: 9/9/2010(UTC)
Posts: 1

After using self cleaning feature the built-in oven and now the oven will not bake or broil. I did all the steps unplung, reset etc. etc. wondering if if is the thermostat.

Thanks
Darrell
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Joe / APP Team  
#2 Posted: : Friday, September 10, 2010 1:53:20 PM(UTC)
Joe / APP Team

Rank: Advanced Member

Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222

Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: johnsoncrew Go to Quoted Post
After using self cleaning feature the built-in oven and now the oven will not bake or broil. I did all the steps unplung, reset etc. etc. wondering if if is the thermostat.

Thanks
Darrell


Most likely, it is the hi limit thermostat.

Part number: AP3885687
Part number: AP3885687


They have a tendency to open in a self clean cycle,and they are a "one shot"design.

You'll need to remove the oven from the cabinet to access the thermostat located on the back of the oven cavity.

You'll also want to check your door gasket for a proper seal when the door is closed.

And the blower motor when it's in the broil cycle, to see if it runs and circulates the air.

Good Luck,
:cool: :cool: :cool:
Users browsing this topic
Guest (2)
Similar Topics
Oven will not bake or broil after wire arcd (Oven Repair (including Ranges and Cooktops))
by Sublime89 6/6/2014 9:55:12 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.