Rank: Member
Groups: Registered
Joined: 9/13/2008(UTC)
Posts: 7
|
No error codes, ever. My husband has the cover on the back off, is there something we should look for?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
|
Look at all the connections make sure they are tight and no corrosion of any kind. A regular pencil eraser works good for cleaning contacts.
Natalie
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 9/13/2008(UTC)
Posts: 7
|
Everything looks like new back there, he looked at the connections and used an eraser. But it still won't stay on.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
|
I would have to say it's the control board/clock is the problem, everythng on the wiring diagram runs thru there.
If you can check the wires going to the ignitor and valve as well might be a good idea. A(Don't touch the ceramic part of the ignitor with bare hands, oil from your fingers will mess it up)
Nat
|
|
|
|
|
|
Rank: Guest
Groups: Joined: 8/10/2018(UTC) Posts: 0  Location: 99556 Was thanked: 4 time(s) in 4 post(s)
|
My accubake is the same way. New igniter?
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
