Dual oven usage creates PF Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: GBD307PDS09	Brand: Whirlpool	Age: 1 - 5 years
Previous Topic Next Topic

klplatt81		#1 Posted : Thursday, September 4, 2008 2:39:45 PM(UTC)
Rank: Member Groups: Registered Joined: 9/4/2008(UTC) Posts: 4		I just replaced the control board and panel. Seemed to be working fine until my wife turned both ovens on. About 2 seconds after she set the second oven and pressed start, all lights lit up and it displayed PF. One oven can be used without any problem but as soon as the other is started it goes to PF. Any ideas?
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Gene		#2 Posted : Friday, September 5, 2008 2:45:26 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Check the lower voltage transformer and how firm it is connected to the control board. Gene.
User Profile View All Posts by User View Thanks

klplatt81		#3 Posted : Saturday, September 6, 2008 12:10:17 PM(UTC)
Rank: Member Groups: Registered Joined: 9/4/2008(UTC) Posts: 4		Thanks....I rechecked all connections. What is happening after playing with it for awhile is that the upper oven works fine. The lower oven works sometimes, but other times goes to PF within a second after hearing relays click. Both ovens together never work. Is it possible that I received a bad control board?
User Profile View All Posts by User View Thanks

Gene		#4 Posted : Saturday, September 6, 2008 2:53:40 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Unfortunately defective new parts do not surprise me anymore. You probably have to exchange the control board. Gene.
User Profile View All Posts by User View Thanks

klplatt81		#5 Posted : Saturday, September 6, 2008 3:57:13 PM(UTC)
Rank: Member Groups: Registered Joined: 9/4/2008(UTC) Posts: 4		Thank you for taking the time to respond! I'll work on a replacement next week. kevin
User Profile View All Posts by User View Thanks

Gene		#6 Posted : Saturday, September 6, 2008 7:27:11 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Keep us posted. Gene.
User Profile View All Posts by User View Thanks

klplatt81		#7 Posted : Tuesday, September 30, 2008 1:51:52 PM(UTC)
Rank: Member Groups: Registered Joined: 9/4/2008(UTC) Posts: 4		I received a new control board, replaced it, and all is working fine! It was, in fact, a defective board. Thanks again for your help!! kevin
User Profile View All Posts by User View Thanks

Gene		#8 Posted : Tuesday, September 30, 2008 6:02:08 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		You're welcome. I'm glad you finally fix it. Gene.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (2)