Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Replaceing Belt
Options
Go to last post Go to first unread
Model: FDE437GHS0 Brand: Frigidaire Age: 5 - 10 years
Previous Topic Next Topic
JamieM  
#1 Posted : Saturday, August 23, 2008 4:51:59 PM(UTC)
JamieM

Rank: Member

Groups: Registered
Joined: 8/23/2008(UTC)
Posts: 4
I want to replace the belt in my dryer but cannot find a repair manual. I need to know how to open the box to gain access to the area. The motors turns, dryer heat is on, but the drum won't turn. Exhaust hose is clean. Noises normal. Any help would be appreciated.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
JamieM  
#2 Posted : Wednesday, August 27, 2008 9:39:31 PM(UTC)
JamieM

Rank: Member

Groups: Registered
Joined: 8/23/2008(UTC)
Posts: 4
Model Number: FDE437GHS0 Brand: Frigidaire
Thanks for the advice to replace belt. Put the dryer back together with no left over parts and no unconnected wires. Plugged into wall. Turned ON, no response. Rechecked the Wires and breaker. Turned ON, no response. What do I do now? Is there a reset button some where?
Any help would be appreciated.
JamieM
Back to top
libertyappl  
#3 Posted : Thursday, August 28, 2008 5:14:34 AM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
Double check the wires to the door switch, if those are connected good it will not start. Also the plastic connectors that you snap together make sure one of the prongs aren't bent over a litle not going into the slot they are supposed to.
Back to top
SublimeMasterJW  
#4 Posted : Thursday, August 28, 2008 5:34:00 AM(UTC)
SublimeMasterJW

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/6/2008(UTC)
Posts: 724

Was thanked: 1 time(s) in 1 post(s)
Remove the tub:a wpdcabinet.jpgIt is hard to read but the thermal fuse it in the upper right hand corner. If it is open then the dryer will not run.It is rather small about the size of a dime.
SublimeMasterJW attached the following image(s):
gibson rear wall.jpg
Back to top
JamieM  
#5 Posted : Monday, September 1, 2008 9:30:32 AM(UTC)
JamieM

Rank: Member

Groups: Registered
Joined: 8/23/2008(UTC)
Posts: 4
Thanks-you guys,
It was the door switch. Dryer works like a charm.
JamieM
Back to top
Users browsing this topic
Guest (4)
Similar Topics
Replaceing Belt (Dryer Repair)
by JamieM 8/23/2008 5:00:31 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET