Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
3 Pages<123>
drum wont turn
Options
Go to last post Go to first unread
Model: PYE2300AYW Brand: Maytag Age: 5 - 10 years
Previous Topic Next Topic
Reenie50  
#11 Posted : Tuesday, August 19, 2008 9:02:11 AM(UTC)
Reenie50

Rank: Member

Groups: Registered
Joined: 8/19/2008(UTC)
Posts: 14
I have another question when I push in the knob and it wants to stats it justs quits and then I have to wait a few mintues and then push the knob in again
Back to top
Reenie50  
#12 Posted : Tuesday, August 19, 2008 9:03:20 AM(UTC)
Reenie50

Rank: Member

Groups: Registered
Joined: 8/19/2008(UTC)
Posts: 14
there does not seems to be anything in the blower I went down and checked
Back to top
abadfish66  
#13 Posted : Tuesday, August 19, 2008 9:11:20 AM(UTC)
abadfish66

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/28/2008(UTC)
Posts: 1,620
You should have no play in the rollers. The motor is tripping on the overload protector, once it is tripped it has tp cool before it will start again. If everything is checking out ok, then it looks like the motor may need replacing, but find out where the rubbing is coming from.
Back to top
Reenie50  
#14 Posted : Tuesday, August 19, 2008 9:19:20 AM(UTC)
Reenie50

Rank: Member

Groups: Registered
Joined: 8/19/2008(UTC)
Posts: 14
what if it just full of lint
Back to top
abadfish66  
#15 Posted : Tuesday, August 19, 2008 9:21:58 AM(UTC)
abadfish66

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/28/2008(UTC)
Posts: 1,620
The motor could be gummed up with lint clean motor if there is lots of lint and see what happens
Back to top
Reenie50  
#16 Posted : Tuesday, August 19, 2008 9:23:21 AM(UTC)
Reenie50

Rank: Member

Groups: Registered
Joined: 8/19/2008(UTC)
Posts: 14
which is the fast and easiest way to get to the motor
Back to top
Reenie50  
#17 Posted : Tuesday, August 19, 2008 9:23:51 AM(UTC)
Reenie50

Rank: Member

Groups: Registered
Joined: 8/19/2008(UTC)
Posts: 14
can I take the back off the dryer
Back to top
abadfish66  
#18 Posted : Tuesday, August 19, 2008 10:03:38 AM(UTC)
abadfish66

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/28/2008(UTC)
Posts: 1,620
No, don't take the back off, you need to remove the belt, and pull the drum out
Back to top
Reenie50  
#19 Posted : Tuesday, August 19, 2008 10:33:01 AM(UTC)
Reenie50

Rank: Member

Groups: Registered
Joined: 8/19/2008(UTC)
Posts: 14
I removed the drum and I found a looks like a clip it is a half moon but I dont know where it goes it was laying in the bottom of the dryer
Back to top
abadfish66  
#20 Posted : Tuesday, August 19, 2008 10:42:03 AM(UTC)
abadfish66

Rank: Advanced Member

Groups: Senior Expert
Joined: 5/28/2008(UTC)
Posts: 1,620
If it was this----> Model PYE2300AYW
That clip goes on the shaft that the wheel is attached to to keep it from falling of the shaft
Back to top
Users browsing this topic
Guest (3)
Similar Topics
dryier drum wont turn when clothes are put in, with cloths te dryier will run (Dryer Repair)
by jklimuszka 12/7/2012 3:25:03 AM(UTC)
drum wont turn with a normal load (Dryer Repair)
by fred bruning 4/25/2012 10:42:17 AM(UTC)
LG Front Load-LE Code- Drum wont turn (Washer Repair)
by sleddoc 5/3/2011 5:51:12 AM(UTC)
gas dryer drum wont turn (Dryer Repair)
by mpeccleston 10/24/2010 7:54:23 AM(UTC)
Front Loader drum wont turn (Washer Repair)
by jtoddrn 4/10/2010 8:14:11 AM(UTC)
admiral dryer..drum wont turn (Dryer Repair)
by PJfuture 11/25/2009 6:47:13 AM(UTC)
Drum wont turn (Dryer Repair)
by beachboy 5/5/2009 1:20:56 PM(UTC)
3 Pages<123>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET