Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
control panel lights blinking
Options
Go to last post Go to first unread
Model: GU1200XTLS3 Brand: Whirlpool Age: 1 - 5 years
Previous Topic Next Topic
budbottlemaker  
#1 Posted : Monday, August 18, 2008 4:46:23 PM(UTC)
budbottlemaker

Rank: Member

Groups: Registered
Joined: 8/18/2008(UTC)
Posts: 2
I have a whirlpool dishwasher model GU1200XTLS3 .When I try to wash a load it runs a few minutes then stops and the HI-TEMP SCOUR light is blinking.I try to cancel and then that light starts blinking also.I unplugged the unit for a day and tried to run the diagnostic test but when I try to push the buttons the HI-TEMP SCOUR light starts blinking.Is this a bad control panel or is it the push button panel?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
libertyappl  
#2 Posted : Monday, August 18, 2008 7:30:27 PM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097
If you look at your tech sheet located under bottom panel it gives directions on checking the keypad operation.
If you can't find it let us know. Post what you find here.
Nat
Back to top
budbottlemaker  
#3 Posted : Tuesday, August 19, 2008 9:56:09 AM(UTC)
budbottlemaker

Rank: Member

Groups: Registered
Joined: 8/18/2008(UTC)
Posts: 2
I tried pressing the buttons on the tech sheet. The high-temp scour light continues to blink and nothing else happens.
Back to top
Shanan  
#4 Posted : Tuesday, October 21, 2008 4:25:52 AM(UTC)
Shanan

Rank: Member

Groups: Registered
Joined: 10/21/2008(UTC)
Posts: 2
I know this reply is coming to you late... but I just had the same problem and found the fix... press your "Normal" button then your "Heated Dry" button alternatively several times (quickly). This will reset the control panel and allow you to resume normal functioning.
Back to top
Users browsing this topic
Guest (2)
Similar Topics
Control Panel lights blinking after surge; stovetop works, nothing else does (Oven Repair (including Ranges and Cooktops))
by steinked 1/2/2011 10:45:25 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET