Rank: Member
Groups: Registered
Joined: 8/14/2008(UTC)
Posts: 2
|
The washer will fill and it will spin, and empty, but it will not agitate. Instead it makes a loud humming noise from the motor
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586
Was thanked: 2 time(s) in 2 post(s)
|
Pull the outer panel, remove pump and motor and turn the tranny coupler counterclockwise. Check to see if the agitator agitates, if not you have a bad tranny.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 8/14/2008(UTC)
Posts: 2
|
Ok, i checked the tranny, like you said, and now it appears to be working agian. Why would it not work, and then just start working agian?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586
Was thanked: 2 time(s) in 2 post(s)
|
A piece of the coupler may have jammed the motor, just check, or the pump may have jammed temporarily.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
