Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
E6 F2 error
Options
Go to last post Go to first unread
Model: RBD305PDB8 Brand: Whirlpool Age: 5 - 10 years
Previous Topic Next Topic
dmaresh  
#1 Posted : Monday, July 26, 2010 12:22:57 PM(UTC)
dmaresh

Rank: Member

Groups: Registered
Joined: 7/26/2010(UTC)
Posts: 2
double oven beeps and display shows E6 F2 beeps later and display comes on again. Sometimes can use oven before it beeps and cuts off.
Some say replace key pad and others talk about control panel and control board. How do you figure out which one.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Joe / APP Team  
#2 Posted : Monday, July 26, 2010 12:51:12 PM(UTC)
Joe / APP Team

Rank: Advanced Member

Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222

Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: dmaresh Go to Quoted Post
double oven beeps and display shows E6 F2 beeps later and display comes on again. Sometimes can use oven before it beeps and cuts off.
Some say replace key pad and others talk about control panel and control board. How do you figure out which one.


I believe you mean an F2 E6 code on the dispaly of your wall oven.
In most cases this is indicating that the control board is seeing no circuit on the cancel key of the touchpad.

There is no easy way to test for this complaint, except to disconnect the touchpad ribbon from the control bord, and in most cases you will get another failure code when you apply power back to the wall oven.

I'm pretty sure(90 %) all you will need is the control panel assembly
(see attached)

Part number: AP3131744
Back to top
dmaresh  
#3 Posted : Monday, July 26, 2010 1:16:00 PM(UTC)
dmaresh

Rank: Member

Groups: Registered
Joined: 7/26/2010(UTC)
Posts: 2
Thank you for your information. Does instructions come with the assembly for installation?
Back to top
Joe / APP Team  
#4 Posted : Monday, July 26, 2010 2:01:53 PM(UTC)
Joe / APP Team

Rank: Advanced Member

Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222

Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: dmaresh Go to Quoted Post
Thank you for your information. Does instructions come with the assembly for installation?


No there are no instructions supplied.

It is a somewhat easy repair:

Turn off power to unit at breaker.

Remove panel mounting screws( one on each side of panel near bottom).

lift up on panel (1/2 - 3/4 inch) to un clip panel from frame at top.

Remove ribbon connector from range control board and remove board.

Reverse procedure to install parts and panel .

restore power to the unit and test.
Back to top
Users browsing this topic
Guest (2)
Similar Topics
E6 F2 error codes (Oven Repair (including Ranges and Cooktops))
by tom o 11/30/2011 6:37:15 AM(UTC)
E6 F2 error code for Whirlpool double oven (Oven Repair (including Ranges and Cooktops))
by ddelay 1/2/2010 12:06:19 PM(UTC)
E6 F2 error code (Oven Repair (including Ranges and Cooktops))
by gdonnellan 8/26/2008 8:37:41 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET