Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
khart26  
#1 Posted : Monday, August 4, 2008 11:13:07 AM(UTC)
khart26

Rank: Member

Groups: Registered
Joined: 8/4/2008(UTC)
Posts: 1

Hopefully someone can help me. I had my sump pump stop working witch backed water up all over from my washing machine .. the machine overflowed. Since then my washer wont agitate. I turn it on and it fills but it like gets stuck and if I dont manually move the timer it will keep filling and overflow. It won't agitate either, it goes from filling to draining, it does spin and the timer does move from spinning to turning off by itself. It gets stuck only when it is filling up in the beginning or rinsing. Any ideas? Thank you
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Tuesday, August 5, 2008 10:58:47 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Open the control panel and check if the pressure hose (clear plastic hose) is properly attached to the water pressure switch (#5 on the break down diagram) and it's not broken.

If there is nothing wrong then, most likely the problem is a bad water pressure switch.

- The part number for the water pressure switch is AP2105893

Gene.
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.