Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
mmccoy3636  
#1 Posted : Friday, July 9, 2010 2:43:01 PM(UTC)
mmccoy3636

Rank: Member

Groups: Registered
Joined: 7/9/2010(UTC)
Posts: 1

Door was locked, and now will not unlock. The lever goes back & forth, but something won't release. I suspect it has something to do with the cleaning cycle. Unfortunately, that functionality has been bad for years. The entire Clock unit and board has been bad for years. From the side, I can see, and reach the latch metal with a rod (where it enters the door), but pushing up/down/left/right does no good. Any thoughts?

Thanks!

Matt
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
dhauck59  
#2 Posted : Saturday, September 24, 2011 6:16:30 PM(UTC)
dhauck59

Rank: Member

Groups: Registered
Joined: 9/24/2011(UTC)
Posts: 1

I have the same. What d o you recommend?
Originally Posted by: mmccoy3636 Go to Quoted Post
Door was locked, and now will not unlock. The lever goes back & forth, but something won't release. I suspect it has something to do with the cleaning cycle. Unfortunately, that functionality has been bad for years. The entire Clock unit and board has been bad for years. From the side, I can see, and reach the latch metal with a rod (where it enters the door), but pushing up/down/left/right does no good. Any thoughts?

Thanks!

Matt
Users browsing this topic
Guest (5)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.