Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
jackb  
#1 Posted : Wednesday, July 30, 2008 12:19:23 PM(UTC)
jackb

Rank: Member

Groups: Registered
Joined: 7/30/2008(UTC)
Posts: 3

I ordered (order #413917) a replacement icemaker (AP2984633 or part # 43179430) and installed unit (plug & screw). When I turned the unit and water on, the water ran into the icemaker and continued to do so until it ran over the top. I shut off water, recycled the power, checked all connections and tried again with same results. My thought is the water inlet valve is not operating. Since this is a replacement icemaker, when I looked for a water inlet valve in parts, no related parts are listed.

The original factory icemaker was Model # ECKMF-6 on Whirlpool Refrigerator Model # ED19TKXLGR0.

Can you please assist?

Thanks
Jack
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Wednesday, July 30, 2008 8:20:47 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi Jack,

What was the original problem?

Gene.
jackb  
#3 Posted : Thursday, July 31, 2008 6:09:17 AM(UTC)
jackb

Rank: Member

Groups: Registered
Joined: 7/30/2008(UTC)
Posts: 3

Originally Posted by: Gene Go to Quoted Post
Hi Jack,

What was the original problem?

Gene.

Gene,

The original unit was not operational so I replaced the unit. I am confused why the water continues to run when turned on. I thought the water inlet valve was designed to remain closed if malfunctions. Also I understand that the valve gets powered from the icemaker unit. Could the new replacement unit be "bad"?

Any ideas to test either the unit or the valve?

Thanks
Jack
Gene  
#4 Posted : Thursday, July 31, 2008 12:00:33 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Jack,

Unplug the ice maker while it's filling up. If water will stop then the ice maker is defective.

Gene.
jackb  
#5 Posted : Monday, August 4, 2008 6:33:56 AM(UTC)
jackb

Rank: Member

Groups: Registered
Joined: 7/30/2008(UTC)
Posts: 3

Gene,

The repair required a new fill valve. The valve was stuck open. The unit is now functing properly. Thanks for your assistance.

Jack
Gene  
#6 Posted : Monday, August 4, 2008 1:06:52 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Jack,

I'm glad you were able to fix it.

Gene.
Users browsing this topic
Guest (5)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.