Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

2 Pages12>
Options
Go to last post Go to first unread
Victor Scott  
#1 Posted : Monday, June 28, 2010 9:00:35 AM(UTC)
Victor Scott

Rank: Member

Groups: Registered
Joined: 6/7/2010(UTC)
Posts: 7

Hi,

My 13-year-old Maytag washer sloshes water over the basket and wets the floor. I recently changed the water level switch because at times the water level seemed too high.

With the new switch, I set the water level at "medium", and even so water sloshes out of the basket.

Months ago, I changed the pump and agitator belts because they were worn and back then water was sloshing out of the basket too

This sloshing is strange behavior... Can someone help me here?

Thank you

Victor :confused:
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
sidfink43  
#2 Posted : Wednesday, June 30, 2010 12:12:21 PM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699

If the water level is still too high clean out the tube coming from the water level switch to the tub.
Victor Scott  
#3 Posted : Friday, July 2, 2010 10:01:32 AM(UTC)
Victor Scott

Rank: Member

Groups: Registered
Joined: 6/7/2010(UTC)
Posts: 7

Syd, Thank you for your response.

Before I bought the waterlevel switch I blew into the levelswitch tube and it was clear... didn´t seemed clogged up or anything. What do you suggest I try from here?

Thank you,

Victor
sidfink43  
#4 Posted : Friday, July 2, 2010 11:30:51 AM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699

Is it sloshing out because the water level is too high, or because the motion is too strong.

If the water level is too high you may have gotten a defective water level switch. Yeah, not likely but that is the best explanation.
Victor Scott  
#5 Posted : Monday, July 5, 2010 4:37:00 AM(UTC)
Victor Scott

Rank: Member

Groups: Registered
Joined: 6/7/2010(UTC)
Posts: 7

Sid,

Hi. I cleaned out the waterlevel switch tube -- indeed it was full of gunk and crud. You were right about that! After that, I have no problem with water level. Now, I think the motion of the agitator is too strong or fast. I observed the agitator working by activating the lid switch--it does seem to be strong. What can I do about that?
sidfink43  
#6 Posted : Monday, July 5, 2010 6:25:26 AM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699

There is no adjustment, and given the age of your machine see if a water level setting works at a level that you can live with it rather than undertaking a costly repair.
Victor Scott  
#7 Posted : Monday, July 5, 2010 7:05:11 AM(UTC)
Victor Scott

Rank: Member

Groups: Registered
Joined: 6/7/2010(UTC)
Posts: 7

Sid,

Thank you very much for your advice. I am trying to prolong the life of this washer the most I can, but if it doesn't work well with a different water level I think I will retire it. Regards, Victor.
nocodrew  
#8 Posted : Monday, July 25, 2011 4:28:25 AM(UTC)
nocodrew

Rank: Member

Groups: Registered
Joined: 7/25/2011(UTC)
Posts: 6

Howdy,
So does age of a machine cause the agitator to move too strong?

Thanks,
Drew
nocodrew  
#9 Posted : Monday, July 25, 2011 4:34:00 AM(UTC)
nocodrew

Rank: Member

Groups: Registered
Joined: 7/25/2011(UTC)
Posts: 6

Originally Posted by: nocodrew Go to Quoted Post
Howdy,
So does age of a machine cause the agitator to move too strong?

Thanks,
Drew


Also, is there a way to diagnose my machine to make sure it is working properly at each stage. For example, is it suposed to spin during the agitate cycle?
sidfink43  
#10 Posted : Monday, July 25, 2011 5:23:50 AM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699

It is not supposed to spin during agitation, and this implies a brake problem or a transmission problem
Users browsing this topic
Guest (4)
2 Pages12>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.