Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
washer not spinning fast enough
Options
Go to last post Go to first unread
Brand: Admiral Age: 1 - 5 years
Previous Topic Next Topic
jimmer0311  
#1 Posted : Thursday, June 24, 2010 6:34:40 PM(UTC)
jimmer0311

Rank: Member

Groups: Registered
Joined: 6/24/2010(UTC)
Posts: 1
Model #AAV7000ANN
Ser # 27139118JL
just replaced motor pulley and belt. Now it is not spinning as fast as before, clothes not dripping wet but too wet for dryer. pulley # 21001108 installed. Is this any way tied to the belt/pulley problem or just a coincidence? Noticed the top of agitator is almost independent of the bottom 1/2, can spin upper and the bottom does not. Is this normal? Seems the large pulley on bottom of drum is good, but as it goes up something is not working correct? Seems like something is slipping. Help please, or just say if more info is needed. thanks
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
sidfink43  
#2 Posted : Sunday, June 27, 2010 2:53:54 PM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699
If you did not replace the thrust bearing when you replaced the pulley, try that. Here is the part.

Part number: AP4009132
Back to top
Users browsing this topic
Guest (2)
Similar Topics
washer not spinning fast enough (Washer Repair)
by oilheatplus 3/26/2013 3:40:58 PM(UTC)
Maytag washer not spinning fast enough to drain (Washer Repair)
by jdeemer 1/2/2013 12:31:23 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET