Whirlpool duet washer f71 and f70 codes? - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Whirlpool duet washer f71 and f70 codes? Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: WFW9550WL	Brand: Maytag	Age: 1 - 5 years
Previous Topic Next Topic

james ngo		#1 Posted : Monday, June 14, 2010 4:38:00 PM(UTC)
Rank: Member Groups: Registered Joined: 6/14/2010(UTC) Posts: 1		I have a maytag duet washer and gettinga f71 and f70 sometimes i opened up the top panel and wiggled some of the connectors and turned it on and was able to wash 4 loads without any issues and a few days later im getting the codes again but its spuratic disconnect the power and it will start a cycle and spin and stuff but after a few minutes it will give the f71 code again? what can i do to fix it? Ive done the research for it and i dont think its the ccu or interface because if it works sometimes, I believe its a communication issue like loose connections. Any suggestions?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

richappy		#2 Posted : Tuesday, June 15, 2010 3:10:20 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		I would take apart each connector, look for loose pins, then spray each one with non-residue contact cleaning spray available at Radio Shack.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close