start/cancel button not working on maytag 100 series - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

start/cancel button not working on maytag 100 series Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: MDB5600AWW	Brand: Maytag	Age: 1 - 5 years
Previous Topic Next Topic

Suzan		#1 Posted : Monday, June 14, 2010 6:23:31 AM(UTC)
Rank: Member Groups: Registered Joined: 6/14/2010(UTC) Posts: 1		All the other lights are working but the start/cancel button, which is unresponsive, so I can't run the machine. Will replacing the control panel and touch pad solve the problem?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Tuesday, June 15, 2010 12:37:02 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts Replacement parts for MAYTAG MDB5600AWW Dishwasher - Undercounter \| AppliancePartsPros.com Here is the tech sheet http://www.servicematters.com/maytag_library/docs/16023063.pdf And a manual http://www.servicematters.com/maytag_library/docs/16021814.pdf The usual way to trouble shoot this is to check the switches on the control panel (keypad) with a meter, see the tech switch. If OK then the control board is probably the problem You may want to try the following: Connector Cleaning / Checking Unplug the unit Open it up Remove the ribbon cable from the keypad to the control board at the control board. Clean the edge connector. If it is the type where there is not a connector just the insulation is removed, it can be cleaned with a pencil eraser. Do not use an ink eraser as it is too abrasive. Check the tracks in the ribbon cable for hairline cracks. A magnifying glass helps here. Would not hurt to clean the connector on the board. Use electronics contact cleaner or isopropyl alcohol and a tooth brush. Be gentle and do not reconnect till all the solvent evaporates. Reconnect everything and give it a try.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close