Dryer will not restart for a while - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Dryer will not restart for a while Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: ?	Brand: Maytag	Age: 5 - 10 years
Previous Topic Next Topic

ohmiblue		#1 Posted : Thursday, July 17, 2008 5:31:21 PM(UTC)
Rank: Member Groups: Registered Joined: 7/17/2008(UTC) Posts: 3		My dryer starts and then shuts off, but the timer keeps running and then I cannot get it to restart again unless I let it cool down. Is it my timer, fuzes or thermostat??? Please help.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Gene		#2 Posted : Friday, July 18, 2008 12:57:37 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Most likely the problem is a bad motor. I need the complete model number for more accurate advise. You can find it on the door frame. Gene.


User Profile View All Posts by User View Thanks

ohmiblue		#3 Posted : Saturday, July 19, 2008 4:51:24 AM(UTC)
Rank: Member Groups: Registered Joined: 7/17/2008(UTC) Posts: 3		Gene, The model # is PYG2000AWW Serial # is 11744632UU Thanks.


User Profile View All Posts by User View Thanks

Gene		#4 Posted : Sunday, July 20, 2008 11:56:25 AM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		As I said, most likely the problem is a bad motor. You can run a simple test to make sure if this the problem. You need someone to give you a hand. At the time when you can not restart the dryer, open the door, push and hold the door switch, push the start button and manually turn the drum. If it'll start or it'll make a humming noise than, no doubts, the motor is bad. - The part number for the motor is AP3497038 Here are the break down diagrams for the Maytag dryer Model PYG2000AWW Gene.


User Profile View All Posts by User View Thanks

ohmiblue		#5 Posted : Sunday, July 27, 2008 5:06:50 PM(UTC)
Rank: Member Groups: Registered Joined: 7/17/2008(UTC) Posts: 3		Just wanted all to know that the reason my dryer would not work properly was because my dryer vent was bent shut and the dryer was overheating. It was not the motor that was bad. So, check your venting system first. It can cause lots of problems. Thanks for your responses and help.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close